LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q3 Premium Plus S-Line >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Assembly [DKTA,DKTC,DKXA,DHHA] >> 10 Engine Assembly >> Assembly Mounts >> Engine Mount, Removing And Installing >> Removing

Engine Mount, Removing And Installing: Removing

-- Disconnect the connector -1-.

GWWA10-11626Courtesy of AUDI OF AMERICA, LLC

-- Free up the clip -2- with the hose for the EVAP system and fuel hose.

-- Release the retainers with a screwdriver -arrow- and move the coolant expansion tank to the side.

Vehicles with Fuel Tank Leak Detection Module -GX36- 

GWWA10-12466Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -arrow- and remove the EVAP system hose.

Continuation for all vehicles: 

GWWA10-11464Courtesy of AUDI OF AMERICA, LLC

-- Support the engine in the installation position. Refer to ENGINE, SUPPORTING IN INSTALLATION POSITION .

-- Remove the bolts -arrows- and engine mount -1-.

scientia non olet · About LEMON Manuals