Engine, Supporting In Installation Position

Special tools and workshop equipment required

Procedure

-- Remove the engine cover and heat shield. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Remove the left and right covers for the fender. Refer to FENDER COVER, REMOVING AND INSTALLING .

-- Position the :10-222A at the left and right on the longitudinal member.

Courtesy of AUDI OF AMERICA, LLC

-- Engage the :10-222A/11 at the left and right on the engine lifting eyes.

-- Tension the engine with the spindles slightly until the engine mount is not under a load.

Assembling

Assemble in the reverse order of removal. Note the following:

-- Install the heat shield and engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .