Steering Gear, Removing And Installing: Notes
Special Tools And Workshop Equipment Required
- Torque Wrench 1331 5-50Nm:VAG1331
- Torque Wrench 1332 40-200Nm:VAG1332
- Engine and Gearbox Jack:VAS6931
- Ball Joint Splitter :VAS251805
- Locating Pin:T40334
- Support Brace:T40335
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.
Mandatory Replacement Parts
- Nut - Steering Gear with Tie Rods to Wheel Bearing Housing
- Bolt - Steering Intermediate Shaft to Steering Gear with Tie Rods
- Bolts - Subframe Crossbrace/Steering Gear to Subframe