Diagnostic Mode 09 - Read Vehicle Information

Diagnostic Mode 09 makes it possible to access vehicle-specific information from the ECM and the TCM (where applicable).

NOTE:

Depending on scan tool and protocol used, Diagnostic Mode 09 and the information provided may be referred to by a different name.

Test requirement

Procedure

-- Connect the scan tool.

-- Ignition switched ON.

-- Select Mode 09: Vehicle information.

-- Select the desired Test-ID.

-- The information requested will be displayed on the scan tool screen.

The following table is a numerical list of all Test-IDs that may be selected.

Test-ID	Diagnostic text
$02:	Vehicle Identification Number e.g.
	Vehicle Identification Number
$04:	Calibration Identification e.g.
	Part number and software version with REC
$06:	CVN (Check Sum) e.g.

$08:	In-use Performance Tracking Information (CAN)
	General Denominator Ignition Cycle Counter Catalytic Converter Fault Finding Counter Bank 1 Catalytic Converter Fault Finding Denominator Bank 1 Catalytic Converter Fault Finding Counter Bank 2 Catalytic Converter Fault Finding Denominator Bank 2 Counter Upstream Oxygen Sensor Fault Finding Catalyst Bank 1 Denominator Upstream Oxygen Sensor Fault Finding Catalyst Bank 1 Counter Upstream Oxygen Sensor Fault Finding Catalyst Bank 2 Denominator Upstream Oxygen Sensor Fault Finding Catalyst Bank 2 Counter EGR Diagnostics / VVT - Diagnosis Denominator EGR Diagnostics / VVT - Diagnosis Counter Secondary Air Diagnostics Denominator Secondary Air Diagnostics Counter Tank Ventilation Diagnostics Denominator Tank Ventilation Diagnostics Counter Upstream Oxygen Sensor Fault Finding Behind Catalyst Bank 1 Denominator Upstream Oxygen Sensor Fault Finding Behind Catalyst Bank 1 Counter Upstream Oxygen Sensor Fault Finding Behind Catalyst Bank 2 Denominator Upstream Oxygen Sensor Fault Finding Behind Catalyst Bank 2
$0A:	ECU Name
$14:	Driving Distance Since Tank Leak Diagnostic Result

-- Switch the ignition off.