Assembly Mount, Checking Adjustment

Procedure 

The following dimensions must be attained:

Fig 1: Identifying Distance And Dimension

Courtesy of AUDI OF AMERICA, LLC

• The clearance between the engine support -2- and the engine mount -1- must be -a- = 10 mm.
• The casting edge on the engine support must be parallel to the engine mount support arm.
• Dimension -b- = dimension -b-.

TIP:

The distance -a- = 10 mm and can also be checked using for example a corresponding round stock.

-- If the distance measured is too small or too large, adjust the subframe. Refer to ASSEMBLY MOUNT, ADJUSTING .