Diagnostic Mode 09 - Read Vehicle Information: Procedure
-- Connect the scan tool.
-- Ignition switched ON.
-- Select Mode 09: Vehicle information.
-- Select the desired Test-ID.
-- The information requested will be displayed on the scan tool screen.
The following table is a numerical list of all Test-IDs that may be selected.
| Test-ID |
Diagnostic text |
| 02: |
Vehicle identification number e.g. |
| |
- Vehicle Identification Number
|
| 04: |
Calibration identification e.g. |
| |
- Part number and software version with REC
|
| 06: |
CVN (check sum) e.g. |
| |
|
| 08: |
In-use Performance Tracking Information (IPT - Counter) |
| |
- General Denominator
- Ignition Cycle Counter
- Catalytic converter fault finding counter Bank 1
- Catalytic converter fault finding Denominator Bank 1
- Catalytic converter fault finding counter Bank 2
- Catalytic converter fault finding Denominator Bank 2
- Counter upstream oxygen sensor fault finding catalyst Bank 1
- Denominator upstream oxygen sensor fault finding catalyst Bank 1
- Counter upstream oxygen sensor fault finding catalyst Bank 2
- Denominator upstream oxygen sensor fault finding catalyst Bank 2
- Counter EGR Diagnostics / VVT - diagnosis
- Denominator EGR Diagnostics / VVT - diagnosis
- Counter secondary air diagnostics
- Denominator secondary air diagnostics
- Counter tank ventilation diagnostics
- Denominator tank ventilation diagnostics
- Counter Upstream oxygen sensor fault finding behind catalyst Bank 1
- Denominator Upstream oxygen sensor fault finding behind catalyst Bank 1
- Counter Upstream oxygen sensor fault finding behind catalyst Bank 2
- Denominator Upstream oxygen sensor fault finding behind catalyst Bank 2
|
| 0A: |
ECU Name |
| 14: |
Drive distance from tank leak diagnostic result |
-- Switch the ignition off.