Removing

NOTE:

The Knock Sensor 1 -G61- is under the intake manifold behind the Engine Temperature Control Actuator -N493- .

-- Remove the Engine Temperature Control Actuator -N493- . Refer to Engine Temperature Control Actuator -N493- , REMOVING AND INSTALLING .

-- Disconnect the connector -3- .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Free up the wire -1- for the Knock Sensor 1 -G61- to do so release the catch -arrow- from the bracket -2- .

-- Remove the bolt -arrow- and then the Knock Sensor 1 -G61- .

Fig 1: Locating Knock Sensor Bolt

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.