Selector Lever Handle, Removing And Installing: Removing
-- Pull the parking brake button to activate the electro-mechanical parking brake.
-- Move the selector lever into "D/S" position.
-- Switch the ignition off.
-- Carefully pry out the selector lever boot with the : T10383/1 on both sides -arrows- and then fold it upward.
-- Turn the locking ring all the way in the direction of -arrow A-.
- The tab -1- on the locking ring is offset to the tab -2- on the selector lever handle.
-- Remove the selector lever handle -1- upward with the selector lever boot in direction of -arrow A- without touching the locking button -2-.