Overview - MECHATRONIC
- Transmission
- DSG Transmission Mechatronic -J743-
- Removing and Installing. Refer to MECHATRONIC, REMOVING AND INSTALLING .
- Bolt
- Tightening sequence. Refer to Fig 2.
- Always replace
- Seal
- Bolt
- 8 Nm + 60°
- Always replace
- Clip
- Always replace
- Transmission Fluid Pan
- Replace after removing
- Removing and Installing. Refer to TRANSMISSION FLUID PAN, REMOVING AND INSTALLING .
DSG Transmission Mechatronic J743 - Tightening Specification and Sequence
- Replace bolts that were tightened with an additional turn after removing them.
-- Tighten the bolts in the steps in the sequence shown:
| Step | Bolts | Tightening Specification/Additional Turn |
|---|---|---|
| 1. | -1 to 9- | Install all the way by hand |
| 2. | -1 to 9- | 8 Nm |
| 3. | -1 to 9- | 45° additional turn |