Night Vision System Control Module, Removing and Installing: Removing: Notes
- Turn off the ignition and all electrical equipment and remove the ignition key.
- Loosen the front left seat and with the wires still attached and push rearward. Refer to Body Interior Front Seats; Overview - Front Seat.
- Remove the floor mat.
- Remove the sill panel. Refer to Body Interior Vehicle Interior Trim Panels; Overview - Rear Shelf.
- Remove the footrest. Refer to Body Interior Vehicle Interior Trim Panels; Overview - Footrest and Carpet.
- Disengage the carpet and push aside.
- Release the clips in the direction of -arrow-.
- Open the cover -1-.
- Push the retaining tab in the direction of -arrow- and remove the Night Vision System Control Module - J853- -3- from the E-box.
- Release connectors -1 and 2- and remove from the Night Vision System Control Module - J853- -3-
- First release the connector -2- and then