Rear Height Sensor: Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Always remove the vehicle height sensor before removing any parts related to the suspension.

Disconnect the ground cable from battery.
Lift up the vehicle body, and remove the left rear wheel.
Disconnect the rear vehicle height sensor connector.
Remove the nut and remove the rear vehicle height sensor.
CAUTION: Remove the bracket as a unit, and do not disassemble the sensor and lever.

Fig 1: Locating Rear Height Sensor And Nuts
Courtesy of SUBARU OF AMERICA, INC.