LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> S8 >> Repair and Diagnosis >> External Pages >> Different car >> Section 1010 (Information And Entertainment Systems - 4.2-Inch (107MM) Screen, Am/Fm/Cd/Sync) >> Removal And Installation >> Antenna Isolator Module >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

  1. 1.

    Remove the RH C-pillar trim panel. For additional information, refer to Interior Trim and Ornamentation .

  1. 2.

    Disconnect the antenna cable connector, the antenna isolator module electrical connector, and the antenna isolator module-to-quarter glass connector.

  1. 3.

    Remove the stud and the antenna isolator module.
    • To install, tighten to 12 Nm (106 lb-in).

  1. 4.

    To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals