CLIP ON Distance Regulation Control Module -J428-, REPLACING, VERSION 3: Procedure

• Distance Regulation Control Module - J428- removed from the retaining plate.

-- Place a screwdriver between the hook and the housing.

-- To prevent the broken hook from getting caught on the housing, remove it from the inside of the clip using needle nose pliers.

-- Insert the new clip into the hole in the housing from the left and then press on it by hand until it clicks into place.

Courtesy of AUDI OF AMERICA, LLC

-- Bend every hook all the way around with the screwdriver until it audibly breaks off.

-- To prevent the broken hook from getting caught on the housing, remove it from the inside of the clip using needle nose pliers.

-- Insert the new clip into the hole in the housing from the left and then press on it by hand until it clicks into place.

Courtesy of AUDI OF AMERICA, LLC

• The tabs on the clip must sit correctly in the recesses.