Signal Horns Overview
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Observe notes on contact corrosion, refer to CONTACT CORROSION .
- Screw
- Tightening specification, refer to SIGNAL HORNS
- High Tone Horn -H2-
- For vehicles with a TDI engine.
- Low Tone Horn -H7-
- For vehicles with a TDI engine.
- Nut
- 11 Nm
- Bracket
- For vehicles with a TDI engine
- Nut
- 11 Nm
- Screw
- 8 Nm
- Right Impact Member Mount
- Nut
- 11 Nm
- Bracket
- For the right horn.
- Removing and installing, refer to SIGNAL HORN BRACKET .
- High Tone Horn -H2-
- For vehicles with a gasoline engine.
- Removing and installing, refer to SIGNAL HORNS .
- Screw
- 8 Nm
- Left Impact Member Mount
- Nut
- 11 Nm
- Bracket
- For the left horn.
- Removing and installing, refer to SIGNAL HORN BRACKET .
- Low Tone Horn -H7-
- For vehicles with a gasoline engine.
- Removing and installing, refer to SIGNAL HORNS .