LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> RS 7 Base >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control System (Service Information 1 Of 2) >> Air Conditioning >> A/C Compressor >> Drive Plate With Overload Protection, Removing And Installing >> Tightening Specifications

Tightening Specifications

-- Position the drive plate with the overload protection -B- onto drive plate.

-- Insert the bolts and tighten them all the way by hand.

-- Check the drive plate run-out. Refer to DRIVE PLATE WITH OVERLOAD PROTECTION, CHECKING RUN-OUT AND ADJUSTING .

-- Tighten the bolts.

-- Check the drive plate run-out again.

scientia non olet · About LEMON Manuals