LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> RS 7 Base >> Repair and Diagnosis (Single Page) >> General Information >> Identification >> Maintenance System (General & Service Information - 2 Of 2) >> Maintenance >> Maintenance Work >> Vehicle Key, Checking Function And Entering Number Of Assigned Keys >> Procedure:

Vehicle Key, Checking Function And Entering Number Of Assigned Keys: Procedure:

-- Separate the set of keys so that the function of each key can be checked individually.

-- Start the engine using each key separately.

-- If a vehicle key is not adapted, readapt all existing vehicle keys to the vehicle using the Guided Functions on the Vehicle Diagnostic Tester via the GeKo online connection.

NOTE:

Only store the key to be checked in the vehicle interior. Move the other keys outside of the operating range.

The engine switches off again after a few seconds if the key is not adapted. Depending on the vehicle equipment, the anti-theft immobilizer system indicator lamp or the display "SAFE" also appears in the instrument cluster.

scientia non olet · About LEMON Manuals