Service Interval Display, Resetting Service Event: Procedure:

-- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .

-- Select Diagnostic mode and start the diagnosis.

-- Perform the vehicle identification.

-- Deselect "Working with Guided Fault Finding" by removing v and pressing Accept .

-- Switch to the "Special functions" tab.

-- Service Interval, Reseting with ODIS (select the corresponding service).

-- Start the program using Perform Test... .

-- Continue the program sequence.

NOTE:

Refer to the Maintenance Table for which service channel to reset and for what data to enter.