LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> RS 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 251 (Seat Frames) >> 72 Seat Frames >> Front Seats >> Seat Functions Control Module, Removing And Installing >> Removing

Seat Functions Control Module, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2017 Audi A3, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Memory Seat/Steering Column Adjustment Control Module -J136-
GWWA72-12229Courtesy of AUDI OF AMERICA, LLC

-- Switch the ignition off.

-- Unscrew the front seat and tip to the rear with the wires attached. Refer to FRONT SEAT, REMOVING AND INSTALLING .

-- Open the tabs -arrows-.

-- Remove the control module -1- from the bracket.

-- Release the connector safety catch and disconnect the connectors -2-.

scientia non olet · About LEMON Manuals