Vehicle Electrical System Control Module -J519-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2017 Audi A3, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the driver side instrument panel cover. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
-- Remove the A-pillar lower trim. Refer to VEHICLE INTERIOR TRIM PANELS .
-- Disconnect the connectors -1, 2 and 3-.
-- To disconnect the connector, press the tab -1-, turn the retaining bracket in direction of -arrow- and remove the connector.
-- Release the springs in direction of -arrow-, pivot the vehicle electrical system control module -4- out of the bracket -5- and remove downward.