LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> Q7 Prestige >> Repair and Diagnosis >> Accessories & Equipment >> Warning Systems >> Communication >> 91 Communication >> Peripheral Camera >> Front Peripheral Camera -R243-, REMOVING AND INSTALLING >> Removing

Front Peripheral Camera -R243-, REMOVING AND INSTALLING: Removing

-- Turn off the ignition and all electrical equipment and remove the ignition key.

-- Remove the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .

-- Remove the mounting bracket with the release cable for the operating lever hook and move it to the side. Refer to OVERVIEW - RELEASE CABLE .

-- Depending on vehicle equipment, remove the upper air duct for better accessibility. Refer to OVERVIEW - RADIATOR/RADIATOR FAN .

-- Remove the screws -2- on the Front Peripheral Camera -R243- -3-.

Fig 1: Identifying Front Peripheral Camera -R243- Screws
GWWA91-12111Courtesy of AUDI OF AMERICA, LLC

-- Remove the Front Peripheral Camera -R243- -3- from the radiator grille.

-- Release and disconnect the wire -1- from the Front Peripheral Camera -R243- -3-.