LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A6 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Front Power Seat Control System (W/ Memory) (Diagnostics - Introduction)) >> Front Power Seat Control System (W/ Memory) >> Customize Parameters [08/2013 - ] >> Customize Parameters [08/2013 - ]

Customize Parameters [08/2013 - ]

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CUSTOMIZE FRONT POWER SEAT CONTROL SYSTEM (w/ Memory) 

    HINT: 

    The following items can be customized.

    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Record the current settings before customizing.
    1. Customizing with the Techstream
      1. Connect the Techstream to the DLC3.
      2. Turn the power switch on (IG).
      3. Turn the Techstream on.
      4. Enter the following menus: Customize Setting / Seat or Smart Key / Access.
      5. Select the setting by referring to the table below.
        SEAT

        Display Default Content Setting Relevant ECU
        Seat Move Distance Standard Allows customizing of the seat movement distance for the power easy access system. OFF / Little / Standard Main body ECU (multiples network body ECU)
        SMART KEY / ACCESS

        Display Default Content Setting Relevant ECU
        Seat position/Tilt & Telesco memory recall setting D Door This customize function switches the condition of the seat position and Tilt & Telesco memory recall. Possible recall activation parameter "D-door unlock and open by smart system" or "Any door unlock and open with smart system". D Door / ANY Door Certification ECU (smart key ECU assembly)
    2. Customizing with the multi-display (w/ Navigation System or w/ Parking Assist Monitor System)
      1. Turn the power switch on (IG).
      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Other Vehicle Settings.
      3. Select the setting by referring to the table below.
        Display Default Content Setting Relevant ECU
        Driver's Seat Easy Exit Full Allows customizing of the seat movement distance for the power easy access system. Off / Partial / Full Main body ECU (multiples network body ECU)
    3. Customizing with the multi-display (w/o Navigation System without Parking Assist Monitor System)
      1. Turn the power switch on (IG).
      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Other Vehicle Settings.
      3. Select the setting by referring to the table below.
        Display Default Content Setting Relevant ECU
        Driver's Seat Easy Exit Full Allows customizing of the seat movement distance for the power easy access system. Off / Partial / Full Main body ECU (multiples network body ECU)
    4. Customizing using the combination meter assembly (w/ Audio and Visual System (w/o Multi-display))

      HINT: 

      • Press and hold the DISP (steering pad switch assembly) when entering an item.
      • Briefly press the DISP (steering pad switch assembly) when selecting an item.
      1. Turn the power switch on (IG).
      2. Enter the following menus: Settings / Vehicle.
      3. Select the setting by referring to the table below:
        Display Default Content Setting Relevant ECU
        Driver's Seat Easy Exit Full Allows customizing of the seat movement distance for the power easy access system. Off / Partial / Full Main body ECU (multiples network body ECU)
scientia non olet · About LEMON Manuals