Monitor-ID $3C: Fuel Tank Venting System Leak Test (0.020" / 0.5 mm)
-- Connect the scan tool.
-- Start the engine and run at idle.
-- Select "Diagnostic Mode 06: Check / test the results of components that are not continuously monitored" .
Select "Monitor-ID $3C" .
-- Select the desired "Test-ID" .
-- Check specified values at idle.
| Test-ID (TID) (Hex-ID) | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| $81 | P0456 | Leakage 0.022" / 0.5 mm. | 0.01 - 0.30 mA/s | 256.0 mA/s | Refer to DTC P0456 in the DTC summary table.Engine Control Module -- P0456 |
-- If any of the components or systems fail to meet the specified values, refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTC or the corresponding diagnostic repair procedure DIAGNOSTIC MODE 03 - READ DTC MEMORY .
-- Switch the ignition off.