Seat Function Control Modules - J136- / -J521-, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2021 Audi S8, 2021 Audi A8 e Quattro, 2021 Audi A8 Quattro, 2020 Audi S8, and 2020 Audi A8 e Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- If the control module was replaced, follow the sequence when connecting the connectors.
-- First connect the connector -5- (coding connector), then connect the other connectors -1 to 4-.
Further installation is performed in reverse order of removal, while noting the following:
-- Install the front seat. Refer to Installing .