LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S8 Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Front Doors, Central Locking System >> 57 Front Doors, Central Locking System >> Door Components >> Striker Pin, Removing And Installing >> Installing

Striker Pin, Removing And Installing: Installing

Install in reverse order of removal. Note the following:

NOTE:

The striker pin backing must be position with the pins -arrows- exactly in the hole.

The striker pins must be sheared off cleanly after sliding the striker pin.

If a new part is being installed, then remove the sheared off pins from the striker pin.

-- Adjust the striker pin. Refer to STRIKER PIN, ADJUSTING .

scientia non olet · About LEMON Manuals