Steering Column, Removing And Installing: Notes

Note the following before removing the steering column:

Create a sketch showing the:

• routing of the electrical wiring harnesses,
• securing the electrical wiring harnesses,
• cable tie locations.

This especially applies to the wiring harness to the Electronic Steering Column Lock Control Module -J764-.

Note the following before installing the steering column:

• Route the wiring harnesses exactly the way they were before removal.
• Secure the wiring harnesses exactly the way they were before removal.
• Install all the cable ties that were loosened or cut in the same locations when installing the steering column.
• Make sure the wiring harness to the Electronic Steering Column Lock Control Module -J764- is not pinched and does not come into contact with sharp edges when adjusting the steering column.