ABS Control Module -J104- and ABS Hydraulic Unit -N55-
- Bolt
- 4.5 Nm
- ABS Control Module -J104-
- Information for exchanging control modules. Refer to CONTROL MODULE, SEPARATING FROM HYDRAULIC UNIT .
- Control module, replacing. Refer to ABS Control Module -J104- /ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING .
- Wiring Harness Connector
- Do not disconnect connector (47 pin) before successfully completing self-diagnosis. Switch ignition off before separating connector
- ABS Hydraulic Unit -N55-
- Removing and installing. Refer to ABS Control Module -J104- /ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING .CAUTION:
There is a risk of destroying the hydraulic unit.
- The pump motor may not be separated from the ABS Hydraulic Unit -N55-.
- Removing and installing. Refer to ABS Control Module -J104- /ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING .