6.4 Lane Change Assistance Control Module - J769-/Lane Change Assistance Control Module 2 - J770-, Removing And Installing
Removing
- Remove the rear bumper cover. Refer to Body Exterior (Rear Bumper; Bumper Cover, Removing and Installing).
- Disconnect the connector -2-.
- Remove the bolts -arrows-.
- Remove the lane change assistance control module -1- from the mount.
Installing
Install in reverse order of removal. Note the following:
- Calibrate the Lane Change Assistance Control Module -J769-/Lane Change Assistance Control Module 2 - J770-. Refer to 6.5 Lane Change Assistance, Calibrating.
Tightening Specifications