LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S7 >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control System (Service Information 1 Of 2) >> Air Conditioning >> A/C Compressor >> A/C Compressor Drive Plate, Removing And Installing >> Tightening Specifications

Tightening Specifications

-- Insert the rubber elements -B- into the drive plate -A- as shown in the illustration and lightly coat using for example tire mounting paste or soap solution (as a lubricant).

-- Insert the drive plate -C- far enough into the rubber elements until it contacts the A/C compressor input shaft -B-.

NOTE:

This illustration shows the rubber elements -B- in version "1". The rubber elements in version "2" are joined to each other at top.

-- Install the drive plate -C- with a commercially available band wrench (with webbed band) by turning it in direction of -arrow E- on the compressor shaft -A- while counterholding it with the counterholder -B- on the compressor shaft -A-.

GWWA87-0625Courtesy of AUDI OF AMERICA, LLC
NOTE:

Depending on the version of the A/C compressor (the A/C compressor shafts are different), use a wrench or, for example, the Extension with Counter Holder 2:T10001/10  from the Shock Absorber Set:T10001  or Counterhold - Shock Absorber:3079  to counterhold.

scientia non olet · About LEMON Manuals