Massage Mat, Removing And Installing: Installing
-- Route the pneumatic lines in the backrest cushion and connect them to the valve block.
-- Connect the pneumatic lines and give them a push again and then a final tug to see whether the coupling is locked in correctly.
-- Attach the bonding with double adhesive tape in the same location it was in when it was removed.
WARNING:
- Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
- Before handling pyrotechnic components (for example, connecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
- Observe all measures when installing the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
Install in reverse order of removal.