Rear Axle

• Brake caliper with two bleeder screws (depending on vehicle equipment).

-- Remove both bleeder screw caps -1- from the rear left brake caliper.

Courtesy of AUDI OF AMERICA, LLC

-- Select the Brake Bleeding Tool Set :VAS 6564  ratchet and the corresponding socket wrench and connect them.

-- Guide the bleed hose -1- out of the Brake Bleeding Tool Set :VAS 6564  from the inside of the wheel rim through the ratchet -2- and the socket wrench -3-, and attach it to the bleeder screw.

Courtesy of AUDI OF AMERICA, LLC

-- Open the bleeder screw using the ratchet -2- and drain the corresponding brake fluid quantity (see table).

-- Close bleeder screw.

-- Guide the bleed hose -1- out of the Brake Bleeding Tool Set :VAS 6564  from the outside of the wheel rim through the ratchet -2- and the socket wrench -3-, and attach it to the bleeder screw.

Courtesy of AUDI OF AMERICA, LLC

-- Open the bleeder screw using the ratchet -2- and and drain the corresponding brake fluid quantity (see table).

-- Close bleeder screw.

-- Install the bleeder screw cap on the brake caliper.

-- Repeat the steps for the rear right.