Selector Lever Cable, Removing And Installing: Installing

Install in reverse order of removal. Note the following:

-- Slide the noise insulation -2- over the opening on the selector lever cable -3-.

Courtesy of AUDI OF AMERICA, LLC

-- Insert the O-ring -1- on the selector lever cable.

Courtesy of AUDI OF AMERICA, LLC

-- Install the selector lever cable -2- into the gearshift mechanism function unit -arrow-.

-- Secure the selector lever cable with a clip -3-.

• Installed position: The angled end of the clip -1- faces the shift mechanism.

  Courtesy of AUDI OF AMERICA, LLC

-- Install the noise insulation -2- with four new lock washers -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Push the selector lever -1- on the transmission all the way to the back in direction of -arrow- until the parking lock locks into place.

Courtesy of AUDI OF AMERICA, LLC

• When parking lock is engaged, it must not be possible to turn the front wheels.

-- Press the selector shaft lever forward three detents so the transmission is in "D/S".

-- Make sure the selector lever inside the vehicle is also in "D/S".

-- Carefully press the selector lever cable ball socket -1- in this position onto the selector shaft lever.

Courtesy of AUDI OF AMERICA, LLC

-- Secure the selector lever cable using a clip -2-.

-- Check and adjust the selector lever cable. Refer to SELECTOR LEVER CABLE, CHECKING AND ADJUSTING .

-- Check the selector mechanism. Refer to GEARSHIFT MECHANISM, CHECKING .