Overview - Rearview Camera System, Through My 2016
The rear view camera system (KA2) assists the driver during back-up driving by providing the driver with an image of the traffic situation behind the vehicle via the Front Information Display Control Head -J685-.
The rear view camera system is switched on when engaging the reverse gear. The system can be activated manually by pressing the Parking Aid Button -E266- in the center console (optional).
The rear view camera system consists of the following components:
- Rearview Camera -R189-
- Rearview Camera System Control Module -J772-
- Information Electronics Control Module 1 -J794-
- Steering wheel with Steering Angle Sensor -G85-
Other control modules may be installed as optional equipment.
It is not permitted to install an auxiliary license plate for vehicles with rear view camera system as it could impair the function of the rear view camera system.
Fault Finding is performed using the "Guided Fault Finding". Refer to Vehicle Diagnostic Tester.
- Data Bus On Board Diagnostic Interface -J533- Under the Rear Bench Seat
- Front Information Display Control Head -J685- in Center of the Instrument Panel
- Information Electronics Control Module 1 -J794- Inside the Instrument Panel
- Multimedia System Control Head -E380- in the Center Console
- CVBS Cable From the Rearview Camera System Control Module -J772-
- CVBS Cable From the Rearview Camera -R189-
- Rearview Camera -R189- in the Rear Lid
- Rearview Camera System Control Module -J772- in the Luggage Compartment on the Right Rear Side
- CAN Bus, Instrument Cluster
- MOST Bus
- Parking Aid Control Module -J446- in the Luggage Compartment on the Right Rear Side
- Instrument Cluster Control Module -J285- in the Instrument Panel
- CAN Bus, Powertrain
- ABS Control Module -J104- in the Engine Compartment
- Steering Angle Sensor -G85- on the Steering Column at the Steering Column Electronic Systems Control Module -J527-