Seat/Steering Column Adjustment Control Module With Memory Function, Removing And Installing: Removing

WARNING:

Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.

-- Remove the front seat. Refer to Removing .

-- Fasten the front seat on the Engine/Transmission Holder - Seat Repair Fixture VAS 6136. Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .

-- Disconnect the connectors -2 through 5- from the control module -1-.

Fig 1: Connectors, Control Module & Retainers

Courtesy of AUDI OF AMERICA, LLC

NOTE:

The number of connectors may vary depending on equipment. The description shows the version with the most equipment possible.

-- Unclip the retainers -6- using the Trim Removal Wedge 3409.

-- Carefully remove the control module -1- from the retainers -arrow-.

Fig 2: Carefully Remove Control Module From Retainers

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the hooks -2- and -3- on the bracket -4- and remove the control module.