LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> R8 Plus, Standard Trans >> Repair and Diagnosis (Single Page) >> General Information >> Reset Procedures >> ATEQ TPMS Reset Procedure >> ATEQ TPMS Reset Procedure

ATEQ TPMS Reset Procedure

NOTE: On Audi vehicles, the TPMS3 cannot be used to register the TPMS sensors, or reset the TPMS.
  1. Adjust tire pressures to specified value.
  2. Turn on the ignition.
  3. Select the menu: Set -> Tire Pressure -> Wheel Change.
  4. "Confirm" to begin the initialization process.
  5. Message appears "Wheel sensors are being initialized. This may take a few minutes"
scientia non olet · About LEMON Manuals