External Audio Source Connection -R199-, REMOVING AND INSTALLING, INTERFACE: Removing

The wires for the interface are components of the wiring harness. They cannot be replaced separately. If faulty, the adapter cable must be installed, refer to the Parts Catalog.

-- Open the glove compartment.

-- Unclip the trim -1- using the Trim Removal Wedge 3409.

Fig 1: External Audio Source Connection (Interface) Is Located Inside Glove Compartment

Courtesy of AUDI OF AMERICA, LLC

The interface (T30b) -1- is installed from behind in the glove compartment.

Fig 2: Identifying Interface (T30b) -1

Courtesy of AUDI OF AMERICA, LLC

The connectors for the interface T4ap -1- and T12y -2- are found on the Information Electronics Control Module 1 -J794-.

Fig 3: Connectors From Interface Are Found On Information Electronics Control Module

Courtesy of AUDI OF AMERICA, LLC