Vehicle Diagnostic Tester, Connecting And Selecting Functions
-- Connect the Vehicle Diagnostic Tester to the vehicle data link connector with the ignition switched off.
NOTE:
Switch the ignition on.
DTC memory interrogated, errors shown corrected and DTC memory erased.
The tester is ready for use when the vehicle symbol is displayed.
-- Turn on the ignition.
-- Start the program in Guided Functions.
-- Select in succession:
- Brand
- Type
- Model year
- Version
- Engine Code
-- Confirm data entered.
Wait until the tester has checked all control modules in vehicle.
-- Press the Go to button and select "Function/component selection".
-- Select "Suspension"
-- Select "Brake system"
-- Select the program on the display.