LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> RS 5 Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> General, Technical Data (Engine Mechanical, Fuel Injection And Ignition) [CFSA] (Coupe) >> 00 General, Technical Data >> Repair Information >> Vacuum System, Checking >> Procedure

Vacuum System, Checking: Procedure

-- Check All Vacuum Lines In The Vacuum System For: 

-- Check the vacuum lines leading both to and from the solenoid valve to the respective component.

-- If there is a fault stored in the Diagnostic Trouble Code (DTC) memory, check the vacuum lines for the named component, but also check all the vacuum lines.

-- If using the Hand Vacuum Pump:VAS6213  does not produce any vacuum or if the vacuum drops again right away, then check the hand vacuum pump and the connection hoses for leaks.

scientia non olet · About LEMON Manuals