LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A6 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Controls, Housing - Automatic Transmission) >> 37 Controls, Housing >> Selector Mechanism >> Selector Mechanism, Removing And Installing >> Installing

Selector Mechanism, Removing And Installing: Installing

WARNING: This page is about a different car, the 2013 Audi A6 and 2012 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Install the selector mechanism function unit and tighten it from the top.

-- Install selector lever cable. Refer to Installing .

-- Adjust the selector lever cable. Refer to SELECTOR LEVER CABLE, CHECKING AND ADJUSTING .

-- Check the selector mechanism. Refer to GEARSHIFT MECHANISM, CHECKING .

-- Install the driveshaft intermediate bearing. Refer to REAR FINAL DRIVE 0BC, 0BD, 0BE & 0BF .

-- Install the front ashtray or storage compartment. Refer to FRONT ASHTRAY/STORAGE COMPARTMENT or STORAGE COMPARTMENT .

-- Install the selector lever handle. Refer to Installing .

scientia non olet · About LEMON Manuals