Selector Lever Sensor System Control Module -J587-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2013 Audi A6 and 2012 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the selector lever handle. Refer to Removing .
-- Remove the Multimedia System Control Head -E380-. Refer to MULTIMEDIA SYSTEM CONTROL HEAD -E380-, REMOVING AND INSTALLING .
-- Disconnect the connector -1-.
-- Open the four tabs -arrows- and remove the Selector Lever Sensor System Control Module -J587- -item 2- upward. See illustration above.