Front Brake Disc: Installation

WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

1.

Clean any rust or foreign material from the brake disc and wheel hub.
- Use specified parts cleaner to clean the front brake disc and hub surfaces.

2.

Install the brake disc on the wheel hub.

3.

Position the brake caliper and anchor plate assembly on the wheel knuckle and install 2 new bolts.
- Tighten to 250 Nm (184 lb-ft).

4.

Install the wheel and tire. For additional information, refer to Wheels and Tires .

5.

Apply the brake pedal several times to verify correct brake system operation.