Removal And Installation

WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

1.

NOTE: It is not necessary to remove the driver air bag module during this procedure.

NOTE: When removing the steering wheel controls, disengage the RH side of the controls first.

Using an appropriate tool, pry the steering wheel controls out of the steering wheel.

2.

NOTE: Do not allow the electrical connector to fall back into the steering wheel.

Remove the steering wheel controls.
- Disconnect the electrical connector.

3.

To install, reverse the removal procedure.