Removal And Installation
WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
- 1.
Open the floor console stowage bin door.
- 2.
Using a suitable flat-bladed tool, remove the audio input jack bezel by prying straight upward.
- Disconnect the audio input jack electrical connector and the Universal Serial Bus(USB) cable, if equipped.
- 3.
Release the tabs and remove the audio input jack.
Courtesy of FORD MOTOR COMPANY
|
- 4.
To install, reverse the removal procedure.