Speech Input Control Module -J507-, REMOVING AND INSTALLING, THROUGH 10/27/2008: Installing

-- Install in reverse order of removal.

-- Make sure that harness connector between Speech Input Control Module -J507- and Radio -R- engages correctly in Radio -R-.

Perform the following function test:

-- Switch on the Radio -R-.

-- Briefly depress PTT  button on multi-function steering wheel.

A "Ping" tone sounds, the speech input system is active.

-- Say "Help".

Since the Radio -R- is active, the speech dialog system responds with "Commands for the radio are...".

Depending on the equipment, other functions can be selected:

-- If a telephone is installed, say "telephone".

The speech dialog system switches to the telephone mode.

-- Press and hold the PPT  button for approximately one second.

The speech dialog system responds with "Cancel" and is deactivated.