| 1 |
- PERFORM: Preliminary Check to verify the customers complaint. Refer to PRELIMINARY CHECK
-- Was Complaint verified? |
-- YES:
-- NO:
- Gather more Information from customer about the concern.
|
| 2 |
- IGNITION: OFF
- DISCONNECT: Outside Air Temperature Sensor -G17- connector
- CHECK: Outside Air Temperature Sensor -G17- terminals 1 to 2 for resistance. (Refer to the proper repair information for component location)
- SPECIFIED VALUE: 1300 Ω (+/- 500 Ω @ approx. 20°C)
-- Was value obtained? |
-- YES:
-- NO:
- REPLACE: Outside Air Temperature Sensor -G17-. Refer to appropriate repair information.
- GO TO: Step 4
|
| 3 |
- REMOVE: Vehicle Electrical System Control Module -J519-. Refer to appropriate repair information.
- CHECK: Outside Air Temperature Sensor -G17- connector terminals 1 to the Vehicle Electrical System Control Module -J519- connector terminals Txx / xx.
- CHECK: Outside Air Temperature Sensor -G17- connector terminals 2 to the Vehicle Electrical System Control Module -J519- connector terminals Txx / xx.
- SPECIFIED VALUE: 0.5 Ω (± 0.3 Ω)
-- Was value obtained? |
-- YES:
- REPLACE Vehicle Electrical System Control Module -J519- Refer to appropriate repair information
- GO TO: Step 4
-- NO:
- CHECK: wiring for open, high resistance, short or connector for damage, corrosion, loose or broken terminals
- REPAIR: faulty wiring or connector
- GO TO: Step 4
|
| 4 |
- Final Procedure
- Perform a road test to verify repair.
- Do any DTC's return:
|
-- YES:
-- NO:
- Repair is complete, Generate readiness code. Refer to READINESS CODES
.
- Return vehicle to Customer
|