LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2013 >> S6 >> Repair and Diagnosis (Single Page) >> Maintenance >> Procedures >> Maintenance Procedures >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Windshield Washer System Freeze Protection, Filling Fluid >> Freeze Protection, Checking >> Notes

Freeze Protection, Checking: Notes

WARNING:

Warning information for the high voltage system:

Procedures where the ignition must be switched off. Refer to PROCEDURES FOR WHICH THE IGNITION NEEDS TO BE SWITCHED OFF .

Special tools and workshop equipment required 

- -

Perform the following:

-- Use the pipette to put a drop of windshield washer fluid on the refractometer glass, then close the cover glass.

A light-dark line is clearly visible on the "WATERLINE" scale.

-- Determine the freeze protection of the windshield washer fluid with the help of the scale -4- and the Refractometer T10007 A. To do this, read the value on the light-dark line.

Fig 2: Identifying Scales On Refractometer: Coolant Additive G12 Plus And Coolant Additive G13
GWWN01-11032Courtesy of AUDI OF AMERICA, LLC
- -

-- If necessary, adapt the freeze protection value by changing the mixture ratio: