Night Vision System Control Module, Removing And Installing: Removing

-- Turn off the ignition and all electrical consumers and remove the ignition key.

-- Loosen the front left seat and with the wires still attached and push rearward. Refer to 72 SEAT FRAMES .

-- Remove the floor mat.

-- Remove the sill panel. Refer to PASSENGER SIDE INSTRUMENT PANEL VENT .

-- Remove the foot rest. Refer to FOOT REST .

-- Disengage the carpet and push aside.

-- Release the clips in the direction of the -arrow-.

Fig 1: Releasing Clips

Courtesy of AUDI OF AMERICA, LLC

-- Open cover -1-.

-- Push the retaining tab in the direction of the -arrow- and remove the Night Vision System Control Module - J853- -3- from the E-box.

Fig 2: Removing Night Vision System Control Module - J853-

Courtesy of AUDI OF AMERICA, LLC

-- Release connectors -1- and -2- and remove from the Night Vision System Control Module - J853- -3-