| Bracket for the air guide pipe to air guide pipe bolt |
- |
9 |
| Bracket for the electrical connector to Intake Manifold bolt |
- |
4 |
| Charge air pressure sensor / intake air temperature sensor bolt |
- |
5 |
| Clamp for high pressure line |
- |
9 |
| Counter Pin |
| - On camshaft bearing |
- |
2.5 |
| - On cylinder head |
- |
9 |
| Differential pressure sensor nut |
- |
3.5 |
| Exhaust gas temperature sensor 2 |
- |
45 |
| Engine support adapter to high pressure pump nut |
- |
70 |
| Fuel rail bolt |
- |
22 |
| Fuel temperature sensor |
- |
2 |
| Guide pin |
| - On camshaft bearing |
- |
2.5 |
| - On cylinder head |
- |
9 |
| High pressure line union nut 1 |
- |
25 |
| High pressure pump bolt |
- |
22 |
| Hose connection ring to fuel rail banjo bolt |
- |
25 |
| Intake flap motor to bracket exhaust gas recirculation cooler switch-over valve bolt |
- |
9 |
| Lower Air Filter Housing bolt |
- |
10 |
| Mass airflow sensor to upper air filter housing bolt |
- |
1.5 |
| Mounting pins for engine cover |
- |
1.5 |
| NOx sensor nut |
- |
2.5 |
| Particulate sensor 2 |
- |
50 |
| Particulate sensor to SCR - catalytic converter nut |
- |
3.5 |
| Pipe for Exhaust Gas Recirculation (EGR) system to air guide pipe bolt |
- |
9 |
| Pressure line to particulate filter |
- |
45 |
| Oxygen sensor |
- |
50 |
| Tensioning claw |
| - First tightening |
- |
6 |
| - Second tightening 90 |
|
90° |
| Wiring guide to intake manifold bolt |
- |
4 |
- 1
Coat the union nut threads with clean engine oil
- 2
Coat with hot bolt paste
|