LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2013 >> A6 Premium Plus >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Controls, Housing - Continuously Variable Transmission >> 37 Controls, Housing >> ATF Circuit >> ATF Pipes, Removing And Installing >> Installing >> Clean

ATF Pipes, Removing And Installing: Installing: Clean

NOTE:

Clean working conditions for the automatic transmission, refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .

-- Before installing a replacement transmission, always clean out the ATF cooler and ATF pipe/hose line using compressed air (maximum 10 bar (145 psi)), refer to CLEAN .

WARNING:

Danger of eye injury.

  • Wear protective eyewear.

-- Place the Used Oil Collection and Extraction Unit SMN372500 under the separating points.

NOTE:

If extremely dirty ATF flows out when cleaning using compressed air, flush the ATF cooler and the ATF pipe/hose line using clean ATF.

scientia non olet · About LEMON Manuals