Pinpoint Test Z : DTC U0100:00: Notes
WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostic Overview
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods in Service Information for information about these practices.
Normal Operation and Fault Conditions
The GPSM and PCM communicate through the HS-CAN and MS-CAN, with the BCM acting as a gateway.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0100:00 | Lost Communication with ECM/PCM "A": No Sub Type Information | Set by the GPSM when network messages are missing from the PCM for more than 5 seconds with the ignition in RUN. |