Wiper, Moving Into Service Position

NOTE:

If the windshield wiper motor is to be run during the work procedure, the hood must be closed, otherwise the voltage supply of the wiper motor will be interrupted.

-- Make sure the wiper blades are not frozen.

-- Turn on the ignition.

-- Using the multimedia system control head, activate the menu entry windshield wiper "on". Refer to the Owner's Manual.

The windshield wipers run into "Service position".

-- Turn off the ignition.

CAUTION:

Risk of damaging the hood by running the wipers back in basic position.

Do not drive a vehicle with windshield wiper arms folded up.
The windshield wipers automatically go back into their rest position when the wiper switch is activated or when driving faster than six km/h.